One of the defining characteristics of 4WD vehicles is their ability to operate in either two- or four-wheel drive. In these vehicles, a transfer case allows power to be sent either to the rear wheels or to both the front and rear wheels at the same time. As you can imagine, the transfer case is the critical component in four-wheel drive vehicles, and neglect or failure of the transfer case can result in the loss of four-wheel drive capability. Here are some tips for making sure your four-wheel drive vehicle can keep on four-wheeling!

Tip 1: Proper Driving Habits

Engaging four-wheel drive evokes a sense of power and transforms your road experience. However, it’s important to note that using it is unnecessary when road conditions are favorable. Four-wheel drive becomes indispensable only when navigating rugged terrain or encountering slippery surfaces. In normal, everyday driving you should only use 2WD. Considering that the majority of vehicles operate in two-wheel drive, it’s safe to say it’s perfectly suitable for most driving scenarios.

Tip 2: Maintaining the Fluid in Your Transfer Case

When operating your vehicle, the transfer case requires proper lubrication to maintain optimal temperature. Without proper lubrication, your transfer case would quickly overheat. Maintaining the proper type and level of fluid in your transfer case ensures smooth operation and prevents metal components from premature failure due to damage from excessive heat.

Tip 3: Warning Lights

The modern four-wheel drive vehicle uses a combination of mechanical and electrical components to offer you a superior driving experience. Many modern four-wheel drive vehicles use complex electronics to control the mechanical transfer case operation, and it’s vital to resolve any electrical issues that arise right away to avoid internal damage to the transfer case.

Don’t ignore the dash: If you have any type of “Service 4WD” warning light pop up on your dashboard, you should have your vehicle inspected right away.

Have Questions? Contact The Gear Shop

We’re here to help, so give us a call with any questions you may have about your transfer case. Reach us at 410-477-4327.

The Gear Shop has been remanufacturing transfer cases since 1945. The information in this article is provided as general guidance. Always consult your vehicle’s owner’s manual for the recommended fluid type, service intervals, and proper four-wheel drive operation for your specific vehicle. Brand names are referenced for identification purposes only.

Platinum No Fault Warranty

36 MONTH / UNLIMITED MILEAGE

The Platinum No Fault Warranty is The Gear Shop’s highest level of coverage and the strongest warranty in the industry. Unlike our Standard Shop Warranty that only covers the part, our Platinum No Fault Warranty also covers your out of pocket expenses — including towing, diagnosis, R&R labor, fluid, rental car, and shipping — for a full 36 months with unlimited mileage. See our warranty page for complete details including limitations.

COVERAGE COMPARISON

Coverage Component Standard Warranty Platinum Warranty
Warranty Term
18 Mo / Unlimited Miles
36 Mo / Unlimited Miles
No Fault Coverage
✗ No
✓ Yes
Replacement Unit
✓ Provided
✓ Provided
Diagnostic Labor
✗ Not covered
✓ Up to $125 (1 hr max)
R&R Labor
✗ Not covered
✓ Up to $125/hr • 5 hr max ($625 max)
Towing
✗ Not covered
✓ Up to $150
Rental Vehicle
✗ Not covered
✓ Up to $70/day • 5 days max ($350 max)
Fluid Replacement
✗ Not covered
✓ Up to $40
Inbound Shipping
✓ Covered
✓ Covered
Outbound Shipping
✓ Covered
✓ Covered

WHAT “NO FAULT” MEANS

If a genuine transfer case failure occurs, we cover it regardless of the cause. Whether the failure resulted from a manufacturing issue or from an installation or operator issue — coverage is authorized as long as a real transfer case failure is confirmed upon inspection.

SINGLE-USE PROVISION

The Platinum Warranty is single-use. After a verified Platinum claim is fulfilled, coverage for the remainder of the 36-month term reverts to our Standard Shop Warranty (parts-only replacement). The warranty term does not reset or extend.

Important: This warranty does not take effect until The Gear Shop has received your qualified return core and original shipping container (or payment of the missing core & container fee). Prior authorization is required before any work is performed, before towing, and before a rental — failure to obtain it results in denial of the claim. The suspected defective unit must first be sent to The Gear Shop for warranty inspection; the replacement unit ships, and reimbursements are issued, only after a genuine transfer case failure is verified. All reimbursements require verified, itemized invoices from licensed businesses open to the public and are subject to the maximums above; submit all reimbursement invoices within 30 days of repair completion. If inspection determines the unit did not fail (misdiagnosis), no coverage of any kind applies and you must repay The Gear Shop’s actual shipping costs within 30 days or this warranty becomes null and void. Coverage applies to the contiguous lower 48 United States only. See the full warranty document for complete terms and conditions.